Table 118 clear Commands (continued)
COMMAND
paepvc
performance
16.7.4 config Commands
These are the configuration file management commands.
Table 119 config Commands
COMMAND
config
default
save
show
16.7.5 diagnostic Commands
These commands allow you to execute a specified diagnostic or test function to an interface
port or a subscriber port.
Table 120 diagnostic Commands
COMMAND
diagnostic
ldm
loopback
Chapter 16 Commands
counter
<slot-
port>|<s
lot-
port-
vpi/vci>
<slot-port>
curr|15min|1day
sys|ip|switch|por
t|profile|acl|vla
n|multicast|all
[nopause]
show
<slot-port>
result|hlin|hlog|q
ln|snr
test
<slot-port>
f5
<slot-port-vpi/
vci>
MSC1000G User's Guide
DESCRIPTION
Resets the PAE PVC counters.
Resets subscriber line performance
counters.
DESCRIPTION
Resets factory default configuration.
Saves current configuration to non-
volatile memory.
Displays the current configuration.
DESCRIPTION
Line Diagnostics Mode tests an ADSL
port.
Displays the most recent line diagnostic
mode test results for the specified
subscriber port.
Sets the specified subscriber port to line
diagnostic mode and displays the results.
Performs an OAMF5 loopback test on the
specified subscriber port or PVC.
P
M
M
P
H
M
L
P
M
M
M
265