Ip Setup; Management Ip Addresses - ZyXEL Communications MGS3600-24F User Manual

F M
RONT ATTER

5.5 IP Setup

Use the IP Setup screen to configure the switch IP address, default gateway device, the default domain name server and the management VLAN
ID. The default gateway specifies the IP address of the default gateway (next hop) for outgoing traffic.

5.5.1 Management IP Addresses

The switch needs an IP address for it to be managed over the network. The factory default static IP address is 192.168.1.1. The subnet mask
specifies the network number portion of an IP address. The factory default subnet mask is 255.255.255.0. Inband configuration applies to non-
management ports and outband configuration applies only to the management port.
The switch gets its management IPv4 configuration via DHCP by default. If there is no DHCP server, the switch uses the static IP configuration.
To set the IPv4 configuration:
1. Click System > IP > IPv4.
2. Specify the IPv4 settings, and enable the
3. Click Save.
MGS3600-24F/XGS3600-26F/XGS3600-28F
DNS Proxy service if required.
5-12 U ' G
SER S UIDE