Communities - ZyXEL Communications MGS3600-24F User Manual

F M
RONT ATTER

6.7.2 Communities

Use the Communities sub-menu to configure the SNMPv3 community table. Each community must be different from the other communities, and
each user name must be different from the other usernames. The maximum number of communities is 4 and the entry index is community.
To configure SNMP Communities:
1. Click System > SNMP
2. Click Add new community.
3. Specify the SNMP community and user name parameters.
4. Click Save.
Parameter description
Delete:

Use this check box to mark an entry for deletion. The entry is deleted during the next save.
Community:

Use this field to configure an SNMPv3 community access string. Community strings can be up to 32 characters, each of which with ASCII
codes from 33 to 126. The community string is treated as a security name and mapped to an SNMPv1 or SNMPv2c community string.
User Name:

Use this field to configure an SNMPv3 user name. User names can be up to 32 characters, each of which with ASCII codes from 33 to 126.
Source IP:

Use this field to limit access to the SNMP agent in this switch by IP source address.
Source Mask:

Use this field to limit access to the SNMP agent in this switch by IP source subnet.
MGS3600-24F/XGS3600-26F/XGS3600-28F
> Communities.
6-24 U ' G
SER S UIDE