F
M
RONT
ATTER
2.2 Rack-Mounted Installation
This section lists the rack mounting requirements and precautions and describes the installation steps.
2.2.1 Rack-mounted Installation Requirements
Two mounting brackets.
Eight M3 flat head screws and a #2 Phillips screwdriver.
Four M5 flat head screws and a #2 Phillips screwdriver.
WARNING:
Failure to use the proper screws may damage the unit.
2.2.1.1 Precautions
Make sure the rack will safely support the combined weight of all the equipment it contains.
Make sure the position of the switch does not make the rack unstable or top heavy. Take all necessary precautions to anchor the rack
securely before installing the unit.
MGS3600-24F/XGS3600-26F/XGS3600-28F
2-4
U
'
G
SER
S
UIDE