Ip Source Guard; Configuration - ZyXEL Communications MGS3600-24F User Manual

F M
RONT ATTER

8.2 IP Source Guard

Use the IP Source Guard sub-menu to configure the switch to mitigate IP source address spoofing on the LAN.

8.2.1 Configuration

Use the Configuration sub-menu to enable IP Source Guard and limit the number of dynamic clients on a port-by-port basis.
To configure IP Source Guard:
1. Click Security > IP Source Guard
2. Configure the parameters.
3. Click Save.
Parameter description
IP Source Guard Configuration
Mode:

Use this drop-down box to globally enable or disable IP Source Guard. All configured ACEs will be lost when the mode is enabled.
Port Mode Configuration
Port:

This field shows the port number for this row.
Mode:

Use this drop-down box to enable or disable IP Source Guard on this port.
Max Dynamic Clients:

Use this drop-down box to configure a maximum of up to
with source addresses in the static table are forwarded via this port.
MGS3600-24F/XGS3600-26F/XGS3600-28F
> Configuration.
3 dynamic clients that can be learned on this port. If this field is 0, only packets
8-3 U ' G
SER S UIDE