Msti Mapping; Configuration Identification - ZyXEL Communications MGS3600-24F User Manual

F M
RONT ATTER

7.5.2 MSTI Mapping

Use the MSTI Mapping sub-menu to configure the mapping between VLANs and each MSTI. The CIST automatically receives the VLANs not
explicitly mapped.
To configure MSTI mapping:
1. Click Configuration >
2. Configure the MSTI Configuration
3. Click Save.
Parameter description
MSTI Mapping parameters consist of
tings that contain the mappings themselves.

Configuration Identification

Configuration Name:

Use this field to configure the name identifying the collection of VLAN to MSTI mappings. Bridges must share have the same
Name and Configuration
be up to 32 characters.
Configuration Revision:

Use this field to configure the revision of the MSTI configuration. This is between 0 and 65535.
MSTI Mapping
MSTI:

This field shows the bridge instance.
VLANs Mapped:

Use this field to configure a comma and/or a space separated list of VLANs mapped to the MSTI. A VLAN can only be mapped to one MSTI.
An unused MSTI should just be left empty (i.e. not having any VLANs mapped to it).
MGS3600-24F/XGS3600-26F/XGS3600-28F
Spanning Tree > MSTI Mapping.
parameters.
Configuration Identification
Revision, as well as the
settings that label the collection of MSTI mappings and
MSTI Mapping configuration to share spanning trees in an MSTI region. The name can
7-32
MSTI Mapping set-
Configuration
U ' G
SER S UIDE