Switch Access And Login - ZyXEL Communications MGS3600-24F User Manual

F M
RONT ATTER

10.2 Switch Access and Login

I forgot the IP address for the switch.
1. The default in-band IP address is 192.168.1.1.
2. Use the console port to log in to the switch.
3. Use the MGMT port to log in to the switch, the default IP address of the MGMT port is 192.168.0.1.
4. If this does not work, you have to reset the device to its factory defaults. See "Factory Defaults" on page 5.
I forgot the user name and/or password.
1. The default user name is admin and the default password is empty.
2. If this does not work, you have to reset the device to its factory defaults. See "Factory Defaults" on page 5.
I cannot see or access the Login screen in the web configurator.
1. Make sure you are using the correct IP address.
The default in-band IP address is 192.168.1.1.

If you changed the IP address, use the new IP address.

If you changed the IP address and have forgotten it, see the troubleshooting suggestions for I forgot the IP address for the switch.

2. Check the hardware connections, and make sure the LEDs are behaving as expected. See "LEDs" on page 13.
3. Make sure your Internet browser does not block pop-up windows and has JavaScript and Java enabled.
4. Make sure your computer is in the same subnet as the switch. If you know that there are routers between your computer and the switch,
skip this step.
5. Reset the device to its factory defaults, and try to access the switch with the default IP address. See "Factory Defaults" on page 5.
6. If the problem continues, contact the vendor, or try one of the advanced suggestions.
Advanced Suggestions
Try to access the switch using another service, such as Telnet. If you can access the switch, check the remote management settings to find
out why the switch does not respond to HTTP.
MGS3600-24F/XGS3600-26F/XGS3600-28F 10-4 U ' G
SER S UIDE