ZyXEL Communications MGS3600-24F User Manual page 269

F M
RONT ATTER
Use this field to configure which port this maintenance point monitors.
Level:

Use this field to configure the Maintenance Entity Group (MEG) level of this maintenance point.
Shared MEGs don't encapsulate subscriber and service provider (SP) frames differently, so a pool of MEG levels are shared. The sub-
scriber uses MEG levels 5 to 7 and the SP uses the remaining levels. When the encapsulation is different, the subscriber and SP can use
all 8 levels.
Flow instance:

Use this field to configure the MEP instance identifier for this flow. A MEP monitors a flow by sending periodic Continuity Check Messages
(CCMs) for that flow.
Tagged VID:

Use this field to configure an outer C/S-TAG depending on the VLAN Port Type (0 means no tag is added).
This MAC:

This field shows the MEP device MAC address. This is used by other MEPs when unicast is selected.
Alarm:

The shows the MEP alarm data. There is an active alarm on the MEP.
MGS3600-24F/XGS3600-26F/XGS3600-28F 7-136 U ' G
SER S UIDE