ZyXEL Communications MGS3600-24F User Manual page 137

F M
RONT ATTER
current Rx and Tx fields show the flow control capabilities of the link partner. If the configured link speed is fixed, the current Rx and Tx fields
reflect that setting. The current Rx and Tx settings are determined by the result of the last Auto-Negotiation. Flow control is not possible for
half duplex (HDX) link speeds.
Maximum Frame Size:

Use this field to configure the maximum frame size, including Frame Check Sequence (FCS) allowed for the port.
Excessive Collision Mode:

Use this drop-down box to configure port transmit collision behavior. Possible collision modes are:
Discard: Discard frame after 16 collisions (default).

Restart: Restart backoff algorithm after 16 collisions.

Power Control:

Use this drop-down box to configure power-saving options. Possible power control modes are:
Disabled: All power saving mechanisms disabled.

ActiPHY: Link down power saving enabled.

PerfectReach: Link up power saving enabled.

Enabled: Both link up and link down power savings enabled.

MGS3600-24F/XGS3600-26F/XGS3600-28F 7-4 U ' G
SER S UIDE