F
M
RONT
ATTER
7.14.5 Port Tag Remarking
Use the
Port Tag Remarking
To configure QoS port tag re-marking:
1. Click
Configuration
>
2. Click the port number to configure the tag re-marking. The
3. Configure the parameters.
4. Click Save.
Parameter description
Tag Remarking Mode:
Use this drop-down box to configure how egress frames are re-marked. Possible values are:
Classified:
Use classified PCP/DEI values.
Default:
Use default PCP/DEI values.
Mapped:
Use mapped versions of QoS class and DP level.
PCP/DEI Configuration
These parameters appear when
Default PCP:
Use this drop-down box to configure the default Priority Code Point.
Default DEI:
Use this drop-down box to configure the default Drop Eligibility Indicator.
DP level Configuration
These parameters appear when
Classified DP Level:
MGS3600-24F/XGS3600-26F/XGS3600-28F
sub-menu to configure how the PCP and DEI fields are re-marked at the egress of switch ports.
QoS
>
Port Tag
Remarking.
Tag Remarking Mode
is Default.
Tag Remarking Mode
is Mapped.
QoS Egress Port Tag Remarking
7-104
page appears.
U
'
G
SER
S
UIDE