Port Status - ZyXEL Communications MGS3600-24F User Manual

F M
RONT ATTER

7.19.3 Port Status

Use the Port Status sub-menu to show the local and remote state of 802.3ah OAM on a port-by-port basis.
To show the 802.3ah OAM port status:
1. Click Configuration >
2. Choose a port number from the port drop-down box next to the
Parameter description
PDU Permission:

This field shows the current permission rule-set for the local port. Possible values are
only or ANY.
Discovery State:

The field shows the current state of the discovery process. The possible states are
SEND_LOCAL_REMOTE_STATE,
Remote MAC Address:

This field shows the MAC address of the remote device.
Mode:

The field shows the OAM Mode that the port is operating in
Unidirectional Operation Support:

The field shows the whether the PHY supports unidirectional operation.
Remote Loopback Support:

This field shows whether the port is capable of OAM remote loopback mode.
Link Monitoring Support:

This field shows whether the port can interpret link events.
MIB Retrieval Support:

This field shows whether the ports can send Variable Response OAMPDUs.
MGS3600-24F/XGS3600-26F/XGS3600-28F
802.3ah OAM > Port Status.
SEND_LOCAL_REMOTE_
Auto-refresh check box.
Link
Fault
OK_STATE, SEND_ANY_STATE.
(Active or Passive).
7-128
fault, Receive only, Information exchange
state, Active state, Passive state,
U ' G
SER S UIDE