ZyXEL Communications MGS3600-24F User Manual page 96

F M
RONT ATTER
The following table describes the labels in this screen.
Table 5-4: System > IP > IPv4
L
ABEL
DHCP Client
IP Address
IP Mask
IP Gateway
MGS3600-24F/XGS3600-26F/XGS3600-28F
Figure 5-5. System > IP > IPv4
Use this check box to enable or disable the DHCP client. If DHCP fails and the configured
IP address is zero, DHCP will retry. If DHCP fails and the configured IP address is non-
zero, DHCP will stop and the static IP settings will be used. The DHCP client will
announce the configured System Name as host name to provide DNS lookup.
Use this field to set the management IPv4 address of this switch.
Use this field to set the IPv4 mask of this switch.
Use this field to set the IPv4 address of the default gateway.
5-13
D
ESCRIPTION
U ' G
SER S UIDE