Group To Vlan - ZyXEL Communications MGS3600-24F User Manual

F M
RONT ATTER
LLC: These are single-byte DSAP and SSAP fields each between 0x00 and 0xff.

SNAP: These are the OUI (Organizationally Unique Identifier) and PID (Protocol ID) fields. If the OUI is zero, the protocol ID is the

EtherType (0x0600-0xffff) of the protocol running on top of SNAP. If the OUI is not zero, the protocol ID is any 16-bit value assigned by
that organization to the protocol running on top of SNAP.
Group Name:

Use this field to configure a 16-character alphanumeric group name This name must be unique across groups.

Group to VLAN

Use the Group to VLAN sub-menu to configure how Protocol-based VLAN groups map to VLAN IDs.
To configure Group to VLAN mappings:
1. Click Configuration >
2. Click Add new entry.
3. Configure the parameters.
4. Click Save.
Parameter description
Group Name:

Use this field to configure a 16-character alphanumeric group name The combination of this name and VLAN ID must be unique across
entries and the group name must already be in the
VLAN ID:

Use this field to configure the VLAN ID to which Group Name will be mapped.
Port Members:

Use these check boxes to configure membership for each VLAN ID. No ports are members by default.
MGS3600-24F/XGS3600-26F/XGS3600-28F
VLAN > Protocol-based VLAN > Group to VLAN.
Protocol to Group Mapping
7-89
Table.
U ' G
SER S UIDE