Lacp - ZyXEL Communications MGS3600-24F User Manual

F M
RONT ATTER

7.4.2 LACP

Use the LACP sub-menu to define trunks that dynamically configure themselves.
Configuration
Use the Configuration sub-menu to configure LACP port members and how they negotiate to form trunks.
To configure LACP trunks:
1. Click Configuration >
2. Configure the LACP trunk parameters.
3. Click Save.
Parameter description
Port:

This field shows the port number for this row.
LACP Enabled:

Use this check box to enable or disable LACP on this switch port. LACP will form a trunk when two or more ports are connected to the same
partner. LACP can form maximum of twelve trunks.
Key:

Use this drop-down box and field to configure a key for the trunk. Ports must have the same key to participate in a trunk. Choose
the drop-down box to let the switch configure the key according to link speed (1 for 10Mb, 2 for 100Mb and 3 for 1Gb). Choose
then complete the adjacent field to manually configure a key from 1 to 65535.
Role:

Use this drop-down box to configure whether the port only responds to LACP packets (Passive) or sends LACP packets every second with-
out waiting to receive them first (Active).
MGS3600-24F/XGS3600-26F/XGS3600-28F
Aggregation > LACP > Configuration.
7-25
Auto from
Specific and
U ' G
SER S UIDE