Groups - ZyXEL Communications MGS3600-24F User Manual

F M
RONT ATTER

6.7.4 Groups

Use the Groups sub-menu to configure the SNMP group table. The maximum number of groups is two for SNMP v1/v2 or ten for SNMP v3 and
the entry index is security model and security name.
To configure SNMP Groups:
1. Click System > SNMP
2. Click Add new group.
3. Enter the group information.
4. Click Save.
Parameter description
Delete:

Use this check box to mark an entry for deletion. The entry is deleted during the next save.
Security Model:

Use this drop-down box to configure the security model of a new entry. Possible security models are:
v1: SNMPv1.

v2c: SNMPv2c.

usm: SNMPv3 User-based Security Model (USM).

Security Name:

Use this field to configure a security name. Security names can be up to 32 characters, each of which with ASCII codes from 33 to 126.
Group Name:

Use this field to configure a group name. Group names can be up to 32 characters, each of which with ASCII codes from 33 to 126.
MGS3600-24F/XGS3600-26F/XGS3600-28F
> Groups.
6-27 U ' G
SER S UIDE