Lldp Med Configuration - ZyXEL Communications MGS3600-24F User Manual

F M
RONT ATTER

7.9.3 LLDP MED Configuration

Use the LLDP MED Configuration
Layer Discovery Protocol for Media Endpoint Discovery (LLDP-MED) is an ANSI-TIA-1057 standard that builds on LLDP to provide the following
facilities:
Auto-discovery of LAN policies for plug and play networking. VLAN ID, Layer 2 Priority and Differentiated services (DSCP) settings can be

controlled by a policy.
Device location discovery to allow creation of location databases and, in the case of VoIP, Enhanced 911 services.

Inventory management, allowing network administrators to track their network devices, and determine their characteristics (manufacturer,

software and hardware versions, serial or asset number).
To configure LLDP-MED:
1. Click Configuration >
2. Configure the Fast Start Repeat
3. Under Policies, click
4. Click Save. The Policy Port Configuration
5. Use the check boxes to enable these policies on a port-by-port basis.
6. Click Save.
Parameter description
Fast Start Repeat Count
Use the Fast start repeat count
When an LLDP-MED device is detected, the switch temporarily increases the rate at which LLDP-MED frames are sent to one per second, so
VoIP devices become available quickly in an emergency.
MGS3600-24F/XGS3600-26F/XGS3600-28F
sub-menu to configure location information and quality of service settings for VoIP endpoint devices. Link
LLDP > LLDP-MED Configuration.
Count, Coordinates
Add new policy and complete the policy configuration fields
parameters appear.
field to configure the number of times an LLDP-MED fast start frame is sent to mitigate the risk of frame loss.
Location, Civic Address Location
7-65
and Emergency Call Service parameters.
U ' G
SER S UIDE