Dcb Priority-Flow-Control Priority - Mellanox Technologies Mellanox SX1018 Command Reference Manual

dcb priority-flow-control priority

dcb priority-flow-control priority <prio> enable
no dcb priority-flow-control priority <prio> enable
Enables PFC per priority on the switch.
The no form of the command disables PFC per priority on the switch.
Syntax Description prio
Default PFC is disabled for all priorities.
Modes/Context Config
History 3.1.0000
Role admin
Example
switch (config)# dcb priority-flow-control priority 0 enable
switch (config)# show dcb priority-flow-control
PFC enabled
Priority Enabled List
Priority Disabled List
TC
---
0
1
2
3
Interface
------------
1/1
1/2
1/3
1/4
...
switch (config) #
Related Commands show dcb priority-flow-control
Note
0-7.
: 0
: 1 2 3 4 5 6 7
Lossless
----------
N
Y
Y
N
PFC admin
--------------
Disabled
Disabled
Disabled
Disabled
PFC oper
-------------
Disabled
Disabled
Disabled
Disabled
Mellanox Technologies
Rev 1.6.2
379