Snmp-Server Port - Mellanox Technologies Mellanox SX1018 Command Reference Manual

snmp-server port

snmp-server port <port>
no snmp-server port
Sets the UDP listening port for the SNMP agent.
The no form of the command resets the parameter to its default value.
Syntax Description port
Default 161
Modes/Context Config
History 3.1.0000
Role admin
Example
switch (config) # snmp-server port 1000
switch (config) # show snmp
SNMP enabled:
SNMP port:
System contact:
System location:
Read-only community:
Read-write community: private
Interface listen enabled: yes
No Listen Interfaces.
Traps enabled:
Default trap community:
Default trap port:
No trap sinks configured.
switch (config) #
Related Commands show snmp
Note
UDP port.
yes
1000
my-name
lab
public
yes
public
162
Mellanox Technologies
Rev 1.6.2
226