Ssh Client User - Mellanox Technologies Mellanox SX1018 Command Reference Manual

ssh client user

ssh client user <username> {authorized-key sshv2 <public key> | identity <key
type> {generate | private-key [<private key>] | public-key [<public key>]} |
known-host <known host> remove}
no ssh client user admin {authorized-key sshv2 <public key ID> | identity <key
type>}
Adds an entry to the global known-hosts configuration file, either by generating new
key, or by adding manually a public or private key.
The no form of the command removes a public key from the specified user's autho-
rized key list, or changes the key type.
Syntax Description username
authorized-key sshv2
<public key>
identity <key type>
generate
private-key
public-key
known-host <known host>
remove
Default No keys are created by default
Modes/Context Config
History 3.1.0000
Role admin
Example
switch (config) # ssh client user admin known-host 172.30.1.116 remove
switch (config) #
Related Commands show ssh client
Note If a key is being pasted from a cut buffer and was displayed with a paging program, it
is likely that newline characters have been inserted, even if the output was not long
enough to require paging. One can specify "no cli session paging enable" before run-
ning the "show" command to prevent the newlines from being inserted.
The specified user must be a valid account on the sys-
tem. Possible values for this parameter are "admin",
"monitor", "xmladmin", and "xmluser".
Adds the specified key to the list of authorized SSHv2
RSA or DSA public keys for this user account. These
keys can be used to log into the user's account.
Sets certain SSH client identity settings for a user, dsa2
or rsa2.
Generates SSH client identity keys for specified user.
Sets private key SSH client identity settings for the
user.
Sets public key SSH client identity settings for the user.
Removes host from user's known host file.
Mellanox Technologies
Rev 1.6.2
196