System Profile - Mellanox Technologies Mellanox SX1018 Command Reference Manual

system profile

system profile <profile> [force]
Sets the profile of the system to either InfiniBand, Ethernet or VPI.
In ib-single-switch profile, all network interfaces link protocol set to InfiniBand.
In eth-single-switch profile, all network interfaces link protocol set to Ethernet.
In vpi-single-switch profile, some ports can be defined as Ethernet while some other
as InfiniBand.
Syntax Description profile
force
Default The default system profile depends on the system.
SX6XXX systems will have "ib-single-switch" as default, while SX1XXX will have
"eth-single-switch" as default.
Modes/Context Config
History 3.1.0000
3.2.1100
Role admin
Example
switch (config) # system profile eth-single-switch
switch (config) #
Related Commands show system profile
port type
show ports type
Note •
•
•
•
This command requires a license
This command will delete all switch configuration (keeping IP connectivity) and reset the
system
Refer to the "Licensing" chapter in the MLNX-OS SwitchX User Manual
Refer to the 'port type' command in order to change the link protocol.
• eth-single-swich
• ib-single-switch
• vpi-single-switch
Force operation, without the need for user confirma-
tion.
Initial version
Added vpi-single-switch option
Mellanox Technologies
Rev 1.6.2
278