Ip Igmp Snooping (Config) - Mellanox Technologies Mellanox SX1018 Command Reference Manual

ip igmp snooping (config)

ip igmp snooping {last-member-query-interval <1-25> | proxy reporting
mrouter-timeout <60-600> | port-purge-timeout <130-1225> | report-suppres-
sion-interval <1-25>}
no ip igmp snooping {last-member-query-interval | proxy reporting | mrouter-
timeout | report-suppression-interval}
Configures IGMP global parameters.
The no form of the command resets the IGMP global parameters to default.
Syntax Description last-member-query-inter-
val <1-25>
proxy reporting
mrouter-timeout <60-
600>
port-purge-timeout <130-
1225>
report-suppression-inter-
val <1-25>
Default last-member-query-interval - 1 second.
proxy reporting is disabled
mrouter-timout - 125
port-purge-timeout - 260 seconds
report-suppression-interval - 5 seconds.
Modes/Context Config
History 3.1.1400
Role admin
Sets the time period (in seconds) with which the gen-
eral queries are sent by the IGMP quarrier. After time-
out expiration the port will be removed from the
multicast group.
Enables proxy reporting
Sets the IGMP snooping router port purge time-out
after which the port gets deleted if no IGMP router con-
trol packets are received.
The default value is 125 seconds.
Sets the IGMP snooping port purge time interval after
which the port gets deleted if no IGMP reports are
received.
Sets the IGMP snooping report-suppression time inter-
val for which the IGMPv2 report messages for the same
group will not get forwarded onto the router ports.
The default value is 5 seconds.
Mellanox Technologies
Rev 1.6.2
346