Air Flow; Figure 11: Port Leds; Table 7: Connector Physical And Logical Link Assignments For Ib - Mellanox Technologies TX6100 MetroX Series Hardware User Manual

Rev 1.1
2.1.1.6 Port Connector LED Indicators
Above the uplink ports are LEDs, one for each port
tus according to the LED indication.
Above the downlink ports are LEDs, 1 per port
according to the LED indication.
0 11 12
Table 7 - Connector Physical and Logical Link Assignments for IB
LED Status
Off
Solid Green
Flashing Green
Solid Orange
Flashing Orange
The LED indicator, corresponding to each data port, will light orange when the physical connec-
tion is established (that is, when the unit is powered on and a cable is plugged into the port with
the other end of the connector plugged into a functioning port). When a logical connection is
made the LED will change to green. When data is being transferred the light will blink green.
2.2

Air Flow

These switches can come with two air flow patterns. The two patterns are:
• Connector side inlet to power side outlet
• Power side inlet to connector side outlet
18 Mellanox Technologies

Figure 11: Port LEDs

Port LEDs
TX6100
MGT
CONSOLE
No power to the port
Logical link up
Data activity flashing speed is proportional to data transfer speed
Physical link up
A problem with the physical link,
. The following table shows the port sta-
. The following table shows the port status
PS1
PS2
UID
RST
LED Description
Basic Operation
1 2
EXT 1 EXT 2