Show Ipv6 Neighbors; Ip Dhcp - Mellanox Technologies Mellanox SX1018 Command Reference Manual

show ipv6 neighbors

Syntax Description
Default
Modes/Context
History
Role
Example
Related Commands
Note
2.1.5 DHCP

ip dhcp

show ipv6 neighbors [static]
Displays the Neighbor Discovery Protocol (NDP) table.
static
N/A
Config
3.1.0000
admin
switch (config) # show ipv6 neighbors
IPv6 Address
------------------------------------- ----- ----------------- ---------- ---
2001::2
switch (config) #
ipv6 neighbor
clear ipv6 neighbor
show ipv6
ip dhcp {default-gateway yield-to-static| hostname <hostname>| primary-intf
<ifname> | send-hostname }
no ip dhcp {default-gateway yield-to-static| hostname | | primary-intf | send-host-
name}
Sets global DHCP configuration.
The no form of the command deletes the DHCP configuration.
Filters only the table of the static entries.
Age MAC Address
9428 AA:AA:AA:AA:AA:AA permanent
Mellanox Technologies
Rev 1.6.2
State Interf
mgmt0
57