Mellanox Technologies Mellanox SX1018 Command Reference Manual page 58

Syntax Description yield-to-static|
hostname
primary-intf <ifname>
send-hostname
Default no ip dhcp yield-to-static
no ip dhcp hostname
ip ip dhcp primary-intf mgmt0
no ip dhcp send-hostname
Modes/Context Config
History 3.1.0000
Role admin
Example
switch (config) # ip dhcp default-gateway yield-to-static
switch (config) # show ip dhcp
DHCP primary interface:
DHCP: yield default gateway to static configuration: yes
DHCP Client Options:
switch (config) #
Related Commands show ip dhcp
dhcp [renew]
Note DHCP is supported for IPv4 networks only.
Configured: mgmt0
Active: mgmt0
Send Hostname: no
Client Hostname: switch (using system hostname)
Does not allow you to install a default gateway from
DHCP if there is already a statically configured one.
Specifies the hostname to be sent during DHCP client
negotiation if send-hostname is enabled.
Sets the interface from which a non-interface-specific
configuration (resolver and routes) will be accepted via
DHCP.
Enables the DHCP client to send a hostname during
negotiation.
Mellanox Technologies
Rev 1.6.2
58