Web Http - Mellanox Technologies Mellanox SX1018 Command Reference Manual

web http

web http {enable | port <port number> | redirect}
no web http {enable | port | redirect}
Configures HTTP access to the web-based management console.
The no form of the command negates HTTP settings for the web-based management
console.
Syntax Description enable
port number
redirect
Default HTTP is enabled
HTTP TCP port is 80
HTTP redirect to HTTPS is disabled
Modes/Context Config
History 3.1.0000
Role admin
Example
switch (config) # web http enable
switch (config) # show web
Web-based management console enabled: yes
Web proxy enabled: yes
switch (config) #
HTTP enabled:
HTTP port:
HTTP redirect to HTTPS: no
HTTPS enabled:
HTTPS port:
Listen enabled:
No Listen Interfaces.
Inactivity timeout:
Session timeout:
Session renewal:
Proxy address:
Proxy port:
Authentication type:
Basic auth username:
Basic auth password:
Enables HTTP access to the web-based management
console.
Sets a port for HTTP access.
Enables redirection to HTTPS. If HTTP access is
enabled, this specifies whether a redirect from the
HTTP port to the HTTPS port should be issued to man-
date secure HTTPS access.
yes
80
yes
443
yes
1 hr
2 hr 30 min
30 min
10.10.10.10
1080
basic
web-user
web-password
Mellanox Technologies
Rev 1.6.2
208