Mellanox Technologies Mellanox SX1018 Command Reference Manual page 222

Example
switch (config) # snmp-server host 10.10.10.10 traps version 1
switch (config) # show snmp
SNMP enabled:
SNMP port:
System contact:
System location:
Read-only communities:
Read-write communities:
Interface listen enabled: yes
No Listen Interfaces.
Traps enabled:
Default trap community:
Default trap port:
Trap sinks:
switch (config) #
Related Commands show snmp
snmp-server enable
Note This setting is only meaningful if traps are enabled, though the list of hosts may still
be edited if traps are disabled. Refer to "snmp-server enable" command.
yes
161
public
(none)
10.10.10.10
Enabled: yes
Type: traps version 1
Port: 162 (default)
Community: public (default)
yes
public
162
Mellanox Technologies
Rev 1.6.2
222