Crypto Ipsec Peer Local - Mellanox Technologies Mellanox SX1018 Command Reference Manual

crypto ipsec peer local

crypto ipsec peer <IPv4 or IPv6 address> local <IPv4 or IPv6 address> {enable |
keying {ike [auth {hmac-md5 | hmac-sha1 | hmac-sha256 | null} | dh-group | dis-
able | encrypt | exchange-mode | lifetime | local | mode | peer-identity | pfs-group |
preshared-key | prompt-preshared-key | transform-set] | manual [auth | disable |
encrypt | local-spi | mode | remote-spi]}}
Configures ipsec in the system.
Syntax Description enable
ike
keying
manual
Enables IPSec peering.
Configures IPSec peering using IKE ISAKMP to man-
age SA keys. It has the following optional parameters:
• auth: Configures the authentication algorithm for IPSec
peering
• dh-group: Configures the phase1 Diffie-Hellman group
proposed for secure IKE key exchange
• disable: Configures this IPSec peering administratively
disabled
• encrypt: Configures the encryption algorithm for IPSec
peering
• exchange-mode: Configures the IKE key exchange mode
to propose for peering
• lifetime: Configures the SA lifetime to propose for this
IPSec peering
• local-identity: Configures the ISAKMP payload identifi-
cation value to send as local endpoint's identity
• mode: Configures the peering mode for this IPSec peer-
ing
• peer-identity: Configures the identification value to
match against the peer's ISAKMP payload identification
• pfs-group: Configures the phase2 PFS (Perfect Forward-
ing Secrecy) group to propose for Diffie-Hellman
exchange for this IPSec peering
• preshared-key: Configures the IKE pre-shared key for the
IPSec peering
• prompt-preshared-key: Prompts for the pre-shared key,
rather than entering it on the command line
• transform-set: Configures transform proposal parameters
Configures key management for this IPSec peering:
• auth: Configures the authentication algorithm for this
IPSec peering
• disable: Configures this IPSec peering administratively
disabled
• encrypt: Configures the encryption algorithm for this
IPSec peering
• local-spi: Configures the local SPI for this manual IPSec
peering
• mode: Configures the peering mode for this IPSec peer-
ing
• remote-spi: Configures the remote SPI for this manual
IPSec peering
Configures IPSec peering using manual keys.
Mellanox Technologies
Rev 1.6.2
166