Stats Alarm <Alarm-Id> Rate-Limit - Mellanox Technologies Mellanox SX1018 Command Reference Manual

stats alarm <alarm-id> rate-limit
stats alarm <alarm ID> rate-limit {count <count-type> <count> | reset | window
<window-type> <duration>}
Configures alarms rate limit.
Syntax Description alarm ID
count-type
reset
window-type
Default Short window: 5 alarms in 1 hour
Medium window: 20 alarms in 1 day
Long window: 50 alarms in 7 days
Modes/Context Config
History 3.1.0000
Role monitor/admin
Example
switch (config) # stats alarm paging rate-limit window long 2000
switch (config) #
Related Commands show stats alarm
Note
Alarms supported by the system, for example:
• cpu_util_indiv - Average CPU utilization too high: per-
cent utilization
• disk_io - Operating System Disk I/O per second too high:
kilobytes per second
• fs_mnt - Free filesystem space too low: percent of disk
space free
• intf_util - Network utilization too high: bytes per second
• memory_pct_used - Too much memory in use: percent of
physical memory used
• paging - Paging activity too high: page faults
• temperature - Temperature is too high: degrees
Long medium, or short count (number of alarms).
Set the count and window durations to default values
for this alarm.
Long medium, or short count, in seconds.
Mellanox Technologies
Rev 1.6.2
261