Stats Chd <Chd-Id> Enable - Mellanox Technologies Mellanox SX1018 Command Reference Manual

stats chd <chd-id> enable
stats chd <chd-id> enable
no stats chd <chd-id> enable
Enables the CHD.
The no form of the command disables the CHD.
Syntax Description chd-id
Default Enabled
Modes/Context Config
History 3.1.0000
Role monitor/admin
Example
switch (config) # stats chd memory_day enable
switch (config) #
Related Commands show stats chd
Note
CHD supported by the system, for example:
• cpu_util - CPU utilization: percentage of time spent
• cpu_util_ave - CPU utilization average: percentage of
time spent
• cpu_util_day - CPU utilization average: percentage of
time spent
• disk_device_io_hour - Storage device I/O read/write sta-
tistics for the last hour: bytes
• disk_io - Operating system aggregate disk I/O average:
KB/sec
• eth_day
• eth_hour
• fs_mnt_day - Filesystem system usage average: bytes
• fs_mnt_month - Filesystem system usage average: bytes
• fs_mnt_week - Filesystem system usage average: bytes
• ib_day
• ib_hour
• intf_day - Network interface statistics aggregation: bytes
• intf_hour - Network interface statistics (same as "inter-
face" sample)
• intf_util - Aggregate network utilization across all inter-
faces
• memory_day - Average physical memory usage: bytes
• memory_pct - Average physical memory usage
• paging - Paging activity: page faults
• paging_day - Paging activity: page faults
Mellanox Technologies
Rev 1.6.2
263