Mellanox Technologies Mellanox SX1018 Command Reference Manual page 309

Example
switch (config interface ethernet 1/4) # module-type qsfp-split-4
the following interfaces will be unmapped: 1/4 1/1
Type 'yes' to confirm split: yes
switch (config interface ethernet 1/4) #
Related Commands switchport mode
switchport [trunk | hybrid] allowed-vlan
show vlan
Note •
•
•
The affected interfaces should be disabled prior to the operation
in order to un-split the interface - used the command with "qsfp", the speed is set to
40Gbps "module-type qsfp".
This command is applicable only on 40Gbps Ethernet ports
Mellanox Technologies
Rev 1.6.2
309