Logging Receive - Mellanox Technologies Mellanox SX1018 Command Reference Manual

logging receive

logging receive
no logging receive
Enables receiving logging messages from a remote host.
The no form of the command disables the option of receiving logging messages from
a remote host.
Syntax Description N/A
Default Receiving logging is disabled
Modes/Context Config
History 3.1.0000
Role admin
Example
switch (config) # logging receive
switch (config) # show logging
Local logging level: info
Default remote logging level: notice
No remote syslog servers configured.
Allow receiving of messages from remote hosts: yes
Number of archived log files to keep: 10
Log rotation size threshold: 5.000% of partition (43 megabytes)
Log format: standard
Subsecond timestamp field: disabled
Levels at which messages are logged:
switch (config) #
Related Commands show logging
logging local
logging local override
Note •
•
•
CLI commands: notice
Audit messages: notice
This does not log to the console TTY port
Inband management should be enabled in order to open a channel from the host to the CPU
If enabled, only log messages matching or exceeding the minimum severity specified with
the "logging local" command will be logged, regardless of what is sent from the remote
host
Mellanox Technologies
Rev 1.6.2
116