Radius-Server Host - Mellanox Technologies Mellanox SX1018 Command Reference Manual

radius-server host

radius-server host <IP address> {enable | auth-port <port> | key <secret>|
retransmit <retries> | timeout <seconds>}
no radius-server host <IP address> {enable | auth-port }
Configures RADIUS server attributes.
The no form of the command resets the attributes to their default values and deletes
the RADIUS server.
Syntax Description IP address
enable
port
secret
retries
seconds
Default 3 seconds, 1 retry
Default UDP port is 1812
Modes/Context Config
History 3.1.0000
Role admin
Example
switch (config) # radius-server host 40.40.40.40
switch (config) # show radius
RADIUS defaults:
RADIUS servers:
switch (config) #
Related Commands aaa authorization
radius-server
show radius
Note •
•
Key: 3333
Timeout: 3
Retransmit: 1
40.40.40.40:1812
Enabled: yes
Key: 3333 (default)
Timeout: 3 (default)
Retransmit: 1 (default)
RADIUS servers are tried in the order they are configured
If you do not specify a parameter for this configured RADIUS server, the configuration
will be taken from the global RADIUS server configuration. Refer to "radius-server" com-
mand.
RADIUS server IP address.
Administrative enable of the RADIUS server.
RADIUS server UDP port number.
Sets a secret key (shared hidden text string), known to
the system and to the RADIUS server.
Number of retries (0-5) before exhausting from the
authentication.
Timeout in seconds between each retry (1-60).
Mellanox Technologies
Rev 1.6.2
147