Stats Alarm <Alarm-Id> {Rising | Falling - Mellanox Technologies Mellanox SX1018 Command Reference Manual

stats alarm <alarm-id> {rising | falling}
stats alarm <alarm ID> {rising | falling} {clear-threshold | error-threshold}
<threshold-value>
Configure alarms thresholds.
Syntax Description alarm ID
falling
rising
error-threshold
clear-threshold
threshold-value
Default Default is different per alarm-id
Modes/Context Config
History 3.1.0000
Role admin
Example
switch (config) # stats alarm cpu_util_indiv falling clear-threshold 10
switch (config) #
Related Commands show stats alarm
Note Not all alarms support all four thresholds.
Alarms supported by the system, for example:
• cpu_util_indiv - Average CPU utilization too high: per-
cent utilization
• disk_io - Operating System Disk I/O per second too high:
kilobytes per second
• fs_mnt - Free filesystem space too low: percent of disk
space free
• intf_util - Network utilization too high: bytes per second
• memory_pct_used - Too much memory in use: percent of
physical memory used
• paging - Paging activity too high: page faults
• temperature - Temperature is too high: degrees
Configures alarm for when the statistic falls too low.
Configures alarm for when the statistic rises too high.
Sets threshold to trigger falling or rising alarm.
Sets threshold to clear falling or rising alarm.
The desired threshold value, different per alarm.
Mellanox Technologies
Rev 1.6.2
260