Ldap Host - Mellanox Technologies Mellanox SX1018 Command Reference Manual

ldap host

ldap host <IP Address> [order <number> last]
no ldap host <IP Address>
Adds an LDAP server to the set of servers used for authentication.
The no form of the command deletes the LDAP host.
Syntax Description IP Address
number
last
Default No hosts configured
Modes/Context Config
History 3.1.0000
Role admin
Example
switch (config) # ldap host 10.10.10.10
switch (config) # show ldap
User base DN
User search scope : subtree
Login attribute
Bind DN
Bind password
Group base DN
Group attribute
LDAP version
Referrals
Server port
Search Timeout
Bind Timeout
SSL mode
Server SSL port
SSL cert verify
LDAP servers:
switch (config) #
Related Commands show aaa
show ldap
Note
•
•
: ou=department,dc=example,dc=com
: sAMAccountName
: my-dn
: my-password
: my-group-dn
: member
: 3
: yes
: 389
: 5
: 5
: none
: 636 (not active)
: yes
1: 10.10.10.10
2: 10.10.10.12
The system will select the LDAP host to try according to its order
New servers are by default added at the end of the list of servers
IPv4 or IPv6 address.
The order of the LDAP server.
The LDAP server will be added in the last location.
Mellanox Technologies
Rev 1.6.2
156