Show Configuration - Mellanox Technologies Mellanox SX1018 Command Reference Manual

show configuration

show configuration [audit | | files [<filename>] | full | running [full] | text files]
Displays a list of CLI commands that will bring the state of a fresh system up to
match the current persistent state of this system.
Syntax Description audit
files [<filename>]
full
running
text files
Default N/A
Modes/Context Config
History 3.1.0000
Role monitor/admin
Example
switch (config) # show configuration
##
## Active saved database "newcon"
## Generated at 20114/05/25 10:18:52 +0000
## Hostname: switch-3cc29c
##
##
## Network interface configuration
##
interface mgmt0 comment ""
interface mgmt0 create
interface mgmt0 dhcp
interface mgmt0 display
interface mgmt0 duplex auto
interface mgmt0 mtu 1500
no interface mgmt0 shutdown
interface mgmt0 speed auto
no interface mgmt0 zeroconf
switch (config) #
Related Commands N/A
Note
Displays settings for configuration change auditing.
Displays a list of configuration files in persistent stor-
age if no filename is specified. If a filename is speci-
fied, it displays the commands to recreate the
configuration in that file. In the latter case, only non-
default commands are shown, as for the normal "show
configuration" command.
Does not exclude commands that set default values.
Displays commands to recreate current running config-
uration. Same as "show configuration" except that it
applies to the currently running configuration, rather
than the current persisted configuration.
Displays names of available text-based configuration
files.
Mellanox Technologies
Rev 1.6.2
109