Spanning-Tree Port Type - Mellanox Technologies Mellanox SX1018 Command Reference Manual

spanning-tree port type

spanning-tree port type <port type>
no spanning-tree port type
Configures spanning-tree port type
The no form of the command returns configuration to default.
Syntax Description port type
Default Globally defined by the command "spanning-tree port type <port-type> default"
Modes/Context Config interface ethernet
History 3.1.0000
Role admin
Example
switch (config) # interface ethernet 1/1
switch (config interface ethernet 1/1) # spanning-tree port type edge
switch (config interface ethernet 1/1) #
Related Commands show spanning-tree
Note
Sets the spanning-tree port type. The port type parame-
ter has four options:
• Default (globally defined)
• Edge
• Normal
• Network
In case there is no change of this parameter, the config-
uration will be taken from the global default port type.
Mellanox Technologies
Rev 1.6.2
340