Web Proxy Auth - Mellanox Technologies Mellanox SX1018 Command Reference Manual

web proxy auth

web proxy auth {authtype <type>| basic [password <password> | username
<username>]}
no web proxy auth {authtype | basic {password | username }
Configures authentication settings for web proxy authentication.
The no form of the command resets the attributes to their default values.
Syntax Description type
basic
password
username
Default Web proxy is disabled.
Modes/Context Config
History 3.1.0000
Role admin
Example
switch (config) # web proxy auth authtype basic
switch (config) # web proxy auth basic username web-user
switch (config) # web proxy auth basic password web-password
switch (config) # show web
Web-based management console enabled: yes
Web proxy enabled: yes
switch (config) #
HTTP enabled:
HTTP port:
HTTP redirect to HTTPS: no
HTTPS enabled:
HTTPS port:
Listen enabled:
No Listen Interfaces.
Inactivity timeout:
Session timeout:
Session renewal:
Proxy address:
Proxy port:
Authentication type:
Basic auth username:
Basic auth password:
Configures the type of authentication to use with web
proxy.
The possible values are:
• basic - HTTP basic authentication
• none - No authentication
Configures HTTP basic authentication settings for
proxy. T
he password is accepted and stored in plaintext.
A password used for HTTP basic authentication with
the web proxy.
A username used for HTTP basic authentication with
the web proxy.
yes
80
yes
443
yes
1 hr
2 hr 30 min
30 min
10.10.10.11
40
basic
web-user
web-password
Mellanox Technologies
Rev 1.6.2
214