Power Enable - Mellanox Technologies Mellanox SX1018 Command Reference Manual

power enable

power enable <module name>
no power enable <module name>
Powers on the module.
The no form of the command shuts down the module.
Syntax Description module name
Default Power is enabled on all modules.
Modes/Context Config
History 3.1.0000
Role admin
Example
switch (config) # power enable L01
switch (config) #
Related Commands show power
show power consumers
Note This command is not applicable for 1U systems.
Enables power for selected module.
Mellanox Technologies
Rev 1.6.2
276