Mac-Address-Table Static - Mellanox Technologies Mellanox SX1018 Command Reference Manual

mac-address-table static

mac-address-table static <mac address> vlan <vlan> interface <if-type> <if-
number>
no mac-address-table static <mac address> vlan <vlan> interface <if-type> <if-
number>
Configures a static MAC address in the forwarding database.
The no form of the command deletes a configured static MAC address from the for-
warding database.
Syntax Description mac address
vlan
if-type
if-number
Default No static MAC addresses available in default.
Modes/Context Config
History 3.1.0600
Role admin
Example
switch (config) # mac-address-table static aa:aa:aa:aa:aa:aa vlan 1
interface ethernet 1/7
switch (config) # show mac-address-table
Switch ethernet-default
Vlan
----
1
Number of unicast:
Number of multicast:
switch (config) #
Related Commands show mac-address-table
mac-address-table aging time
Note The no form of the command will not clear a dynamic MAC address. Dynamic MAC
addresses are cleared using the "clear mac-address-table dynamic" command.
Destination MAC address.
VLAN ID or VLAN range.
Ethernet or port-channel interface type.
The interface number (i.e. 1/1, 3).
Mac Address Type
----------- ----
aa:aa:aa:aa:aa:aa static
1
0
Interface
------------
Eth1/7
Mellanox Technologies
Rev 1.6.2
330