Lldp Tlv-Select - Mellanox Technologies Mellanox SX1018 Command Reference Manual

lldp tlv-select

lldp tlv-select { [port-description] [sys-name] [sys-description] [sys-capababili-
ties] [management-address] [none] all}
Sets the LLDP basic TLVs to be transmitted on this port.
Syntax Description port-description
sys-name
sys-description
sys-capabilities
management-address
all
none
Default all
Modes/Context Config interface ethernet
History 3.2.0300
3.3.0000
Role admin
Example
switch (config interface ethernet 1/1)# lldp tlv-select port-descrip-
tion sys-name
switch (config interface ethernet 1/1)#
Related Commands show lldp interface
Note
LLDP port description TLV
LLDP system name TLV
LLDP system description TLV
LLDP system capabilities TLV
LLDP management address TLV
all above TLVs
None of the above TLVs
Initial revision
Added argument
none
Mellanox Technologies
Rev 1.6.2
365