Web Httpd - Mellanox Technologies Mellanox SX1018 Command Reference Manual

Ethernet managed blade switch
Hide thumbs Also See for Mellanox SX1018:
Table of Contents

Advertisement

web httpd

web httpd listen {enable | interface <ifName> }
no web httpd listen {enable | interface <ifName> }
Enables the listen interface restricted list for HTTP and HTTPS.
The no form of the command disables the HTTP server listen ability.
Syntax Description
enable
interface <ifName>
Default
Listening is enabled.
all interfaces are permitted.
Modes/Context
Config
History
3.1.0000
Role
admin
Example
switch (config) # web httpd enable
switch (config) # show web
Web-based management console enabled: yes
Web proxy enabled: yes
switch (config) #
Related Commands
N/A
Note
If enabled, and if at least one of the interfaces listed is eligible to be a listen interface,
then HTTP/HTTPS requests will only be accepted on those interfaces. Otherwise,
HTTP/HTTPS requests are accepted on any interface.
HTTP enabled:
HTTP port:
HTTP redirect to HTTPS: no
HTTPS enabled:
HTTPS port:
Listen enabled:
No Listen Interfaces.
Inactivity timeout:
Session timeout:
Session renewal:
Proxy address:
Proxy port:
Authentication type:
Basic auth username:
Basic auth password:
Enables Web interface restrictions on access to this sys-
tem.
Adds interface to Web server access restriction list (i.e.
mgmt0, mgmt1)
yes
80
yes
443
yes
1 hr
2 hr 30 min
30 min
10.10.10.10
1080
basic
web-user
web-password
Mellanox Technologies
Rev 1.6.2
210

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sx1018hp

Table of Contents