2
System Management
2.1 Management Interfaces
2.1.1 Interface
This chapter describes the commands should be used to configure and monitor the management
interface.
interface
Syntax Description
Default
Modes/Context
History
Role
Example
Related Commands
Note
interface {mgmt0 | mgmt1 | lo}
Enters a management interface context.
mgmt0
mgmt1
lo
ib0
N/A
Config
3.1.0000
admin
switch (config) # interface mgmt0
switch (config interface mgmt0) #
show interfaces <ifname>
Management port 0 (out of band).
Management port 1 (out of band).
Loopback interface.
IP over IB in-band management, relevant only for
InfiniBand switch systems.
Mellanox Technologies
Rev 1.6.2
24