Lacp System-Priority - Mellanox Technologies Mellanox SX1018 Command Reference Manual

lacp system-priority

lacp system-priority <1-65535>
no lacp system-priority
Configures the LACP system priority.
The no form of the command sets the LACP system-priority to default.
Syntax Description 1-65535
Default 32768
Modes/Context Config
History 3.1.1400
Role admin
Example
switch (config)# lacp system-priority 1
switch (config)# show lacp interfaces port-channel
Port-channel Module Admin Status is enabled
Port-channel System Identifier is 00:02:c9:5c:61:70
LACP System Priority: 3
switch (config)#
Related Commands
Note
LACP system-priority.
Mellanox Technologies
Rev 1.6.2
312