Spanning-Tree Bpdufilter - Mellanox Technologies Mellanox SX1018 Command Reference Manual

spanning-tree bpdufilter

spanning tree bpdufilter {disable | enable}
no spanning tree bpdufilter
Configures spanning-tree BPDU filter on the interface. The interface will ignore any
BPDU that it receives and will not send PDBUs, The STP state on the port will move
to the forwarding state.
The no form of the command returns the configuration to default.
Syntax Description disable
enable
Default BPDU filter is disabled.
Modes/Context Config interface ethernet
History 3.1.0000
Role admin
Example
switch (config) # interface ethernet 1/1
switch (config interface ethernet 1/1) # spanning-tree bpdufilter
enable
switch (config interface ethernet 1/1) #
Related Commands show spanning-tree
Note This command can be used when the switch is connected to hosts.
Disables the BPDU filter on this port.
Enables the BPDU filter on this port.
Mellanox Technologies
Rev 1.6.2
342