Show Interfaces Ethernet [<Inf>] Transceiver; Module-Type - Mellanox Technologies Mellanox SX1018 Command Reference Manual

show interfaces ethernet [<inf>] transceiver
Syntax Description
Default
Modes/Context
History
Role
Example
Related Commands
Note
3.1.1 Brake-out cables

module-type

Syntax Description
Default
Modes/Context
History
Role
show interfaces ethernet [<inf>] transceiver
Displays the transceiver info.
inf
N/A
Any Command Mode
3.1.0000
admin
switch (config) # show interfaces ethernet 1/1 transceiver
Port 1/1 state
identifier
cable/ module type
ethernet speed and type: 40GBASE - SR4
vendor
cable_length
part number
revision
serial number
switch (config) #
module-type <type> [force]
Splits or un-splits the interface, as desired.
type
force
interface module type is qsfp (if the interface supports 40Gbps speed)
Config interface ethernet
3.1.1400
admin
interface number: <slot>/<port>
: QSFP+
: Optical cable/ module
: Mellanox
: 50 m
: MC2210411-SR4
: A1
: TT1151-00006
qsfp - Port runs at 40000/56000Mbps.
qsfp-split-2 - Port is split and runs at 2X10000Mbps.
qsfp-split-4 - Port is split and runs at 4X10000Mbps.
force the split operation without asking for user confir-
mation.
Mellanox Technologies
Rev 1.6.2
308