Ping - Mellanox Technologies Mellanox SX1018 Command Reference Manual

4.1.6 IP Diagnostic Tools

ping

Syntax Description
Default
Modes/Context
History
Role
Example
Related Commands
Note
ping [-LRUbdfnqrvVaA] [-c count] [-i interval] [-w deadline] [-p pattern] [-s
packetsize] [-t ttl] [-I interface or address] [-M mtu discovery hint] [-S sndbuf] [-
T timestamp option ] [-Q tos ] [hop1 ...] destination
Sends ICMP echo requests to a specified host.
Linux Ping options
N/A
Config
3.1.0000
admin
switch (config) # ping 172.30.2.2
PING 172.30.2.2 (172.30.2.2) 56(84) bytes of data.
64 bytes from 172.30.2.2: icmp_seq=1 ttl=64 time=0.703 ms
64 bytes from 172.30.2.2: icmp_seq=2 ttl=64 time=0.187 ms
64 bytes from 172.30.2.2: icmp_seq=3 ttl=64 time=0.166 ms
64 bytes from 172.30.2.2: icmp_seq=4 ttl=64 time=0.161 ms
64 bytes from 172.30.2.2: icmp_seq=5 ttl=64 time=0.153 ms
64 bytes from 172.30.2.2: icmp_seq=6 ttl=64 time=0.144 ms
^C
--- 172.30.2.2 ping statistics ---
6 packets transmitted, 6 received, 0% packet loss, time 5004ms
rtt min/avg/max/mdev = 0.144/0.252/0.703/0.202 ms
switch (config) #
traceroute
• Ping to IPv6 address is not supported.
• When using -I option use the interface name + interface number, for example "ping -I
vlan10"
Mellanox Technologies
Rev 1.6.2
411