Show Stats Chd - Mellanox Technologies Mellanox SX1018 Command Reference Manual

show stats chd

show stats chd [<CHD ID>]
Displays configuration of all statistics CHDs.
Syntax Description CHD ID
Default N/A
Modes/Context Config
History 3.1.0000
Role admin
Example
switch (config) # show stats chd disk_device_io_hour
CHD "disk_device_io_hour" (Storage device I/O read/write statistics for
the last
switch (config) #
Related Commands stats chd
Note
hour: bytes):
Enabled: yes
Source dataset: sample "disk_device_io"
Computation basis: data points
Interval: 1 data point(s)
Range: 1 data point(s)
May be:
• cpu_util_indiv - Average CPU utilization too high: per-
cent utilization
• disk_io - Operating System Disk I/O per second too high:
kilobytes per second
• fs_mnt - Free filesystem space too low: percent of disk
space free
• intf_util - Network utilization too high: bytes per second
• memory_pct_used - Too much memory in use: percent of
physical memory used
• paging - Paging activity too high: page faults
• temperature - Temperature is too high: degrees
Mellanox Technologies
Rev 1.6.2
272