Tacacs-Server Host - Mellanox Technologies Mellanox SX1018 Command Reference Manual

tacacs-server host

tacacs-server host <IP address> {enable | auth-port <port> | auth-type <type> |
key <secret> | retransmit <retries> | timeout <seconds>}
no tacacs-server host <IP address> {enable | auth-port}
Configures TACACS+ server attributes.
The no form of the command resets the attributes to their default values and deletes
the TACACS+ server.
Syntax Description IP address
enable
port
type
secret
retries
seconds
Default 3 seconds, 1 retry
Default TCP port is 49
Default auth-type is PAP
Modes/Context Config
History 3.1.0000
Role admin
Example
switch (config) # tacacs-server host 40.40.40.40
switch (config) # show tacacs
TACACS+ defaults:
TACACS+ servers:
switch (config) #
Key: 3333
Timeout: 3
Retransmit: 1
40.40.40.40:49
Enabled: yes
Auth-type PAP
Key: 3333 (default)
Timeout: 3 (default)
Retransmit: 1 (default)
TACACS+ server IP address.
Administrative enable for the TACACS+ server.
TACACS+ server UDP port number.
Authentication type. Possible values are:
• ASCII
• PAP (Password Authentication Protocol)
Sets a secret key (shared hidden text string), known to
the system and to the TACACS+ server.
Number of retries (0-5) before exhausting from the
authentication.
Timeout in seconds between each retry (1-60).
Mellanox Technologies
Rev 1.6.2
150