Mellanox Technologies Mellanox SX1018 Command Reference Manual page 20

cli
enable
exit
help
no
ping
show
slogin
switch
telnet
terminal
traceroute
switch-11a596 [standalone: master] >
If you type a legal string and then you press "?" without a space character before it, then you will
either get a description of the command that you have typed so far or the possible command/
parameter completions. If you press "?" after a space character and "<cr>" is shown, this means
that what you have entered so far is a complete command, and that you may press Enter (carriage
return) to execute it.
Try the following to get started:
?
show ?
show c?
show clock?
show clock ?
show interfaces ?
You can also enter "help" to view a description of the interactive help system.
Note also that the CLI supports command and/or parameter tab-completions and their shortened
forms. For example, you can enter "en" instead of the "enable" command, or "cli cl" instead of "cli
clear-history". In case of ambiguity (more than one completion option is available, that is), then
you can click double tabs to obtain the disambiguation options. Thus, if you are in Enable mode
and you wish to learn which commands start with the letter "c", type "c" and click twice on the tab
key to get the following:
switch [standalone: master] # c<tab>
clear cli
switch-1 [standalone: master] # c
(There are three commands that start with the letter "c": clear, cli and configure.)
Configure CLI shell options
Enter enable mode
Log out of the CLI
View description of the interactive help system
Negate or clear certain configuration options
Send ICMP echo requests to a specified host
Display system configuration or statistics
Log into another system securely using ssh
Configure switch on system
Log into another system using telnet
Set terminal parameters
Trace the route packets take to a destination
(from enable mode)
configure
Mellanox Technologies
Rev 1.6.2
20