Ipv6 Neighbor - Mellanox Technologies Mellanox SX1018 Command Reference Manual

ipv6 neighbor

ipv6 neighbor <IPv6 address> <ifname> <MAC address>
no ipv6 neighbor <IPv6 address> <ifname> <MAC address>
Adds a static neighbor entry.
The no form of the command deletes the static entry.
Syntax Description IPv6 address
ifname
MAC address
Default N/A
Modes/Context Config
History 3.1.0000
Role admin
Example
switch (config) # ipv6 neighbor 2001:db8:701f::8f9 mgmt0
00:11:22:33:44:55
switch (config) #
Related Commands show ipv6 neighbor
ipv6 route
arp
clear ipv6 neighbors
Note •
•
ARP is used only with IPv4. In IPv6 networks, Neighbor Discovery Protocol (NDP) is
used similarly.
Use The no form of the command to remove static entries. Dynamic entries can be cleared
via the "clear ipv6 neighbors" command.
The IPv6 address.
The management interface (i.e. mgmt0, mgmt1).
The MAC address.
Mellanox Technologies
Rev 1.6.2
55